Choose a graphical client for your operating system and compare processor architectures, package formats, and use cases. First-time users should start with a client marked “Top Pick,” then consider other options based on interface preferences and system compatibility.
The platform label is synced to the address bar, so copying the current URL preserves your selected system. Each client card explains its primary use and package differences.
Graphical clients for everyday desktop use. Installers add a Start menu entry and an uninstall option; portable archives are useful when you want to keep a separate configuration directory. Windows on ARM users should note that the main graphical client packages on this page target x64.
A desktop client designed for quick installation and everyday rule-based routing. Subscriptions, proxy groups, system proxy settings, and TUN controls are presented in one place. It suits Windows users new to Clash and makes switching between configurations easy.
A popular Mihomo graphical client for desktop use, with controls for the system proxy, TUN, configuration overrides, and service mode. It suits users who understand rule modes and proxy groups and want finer control over traffic interception.
Its consistent cross-platform interface suits users who work across Windows, Android, or Linux. The installer is intended for standard desktop environments, while the archive runs from a separate directory for easier configuration migration and backup.
A graphical client centered on subscription management, proxy group selection, and desktop controls. It suits Windows users who want to update configurations, switch rule modes, control the system proxy, and view runtime logs in one window.
Retained for users who need compatibility with legacy configurations or older workflows. This client is archived and no longer receives ongoing feature updates; for new installations, prefer Clash Plus, Clash Verge Rev, FlClash, or Clash Nyanpasu above.
| Item | Recommended condition | Pre-installation check |
|---|---|---|
| Operating system | 64-bit Windows 10 or Windows 11 | Complete system updates and confirm that your account can install desktop applications |
| Processor | x64 / AMD64 | Check the system type in Settings > System information |
| Network access | Allow the client to access the network and change proxy settings | The first time you enable TUN or service mode, administrator approval may be required |
Before downloading, check the chip type in About This Mac. Choose Apple Silicon or ARM64 for Apple M-series chips, and Intel or x64 for Intel processors. After installation, move the app to Applications and grant network configuration permissions when prompted.
A macOS client for managing subscriptions, rule modes, and the system proxy. Separate Apple Silicon and Intel downloads are provided, so users can choose the native architecture without relying on an additional translation layer.
Provides Mihomo desktop controls including rule modes, the system proxy, TUN, and configuration overrides. The two architecture links listed here are supplied by the release package; after installation, confirm the core’s running status in the client settings.
Its cross-platform workflow is similar across devices, making it suitable for users who want a consistent setup process on Mac, Android, and Linux. After importing a subscription, update it, choose a proxy, and control the connection from the configuration and proxy pages.
For users accustomed to menu bar controls and the legacy ClashX workflow, retained as an archived option. For new deployments, prefer a client that is still actively maintained; before migrating an older setup, export the existing configuration and record the system proxy settings.
| Item | Recommended condition | How to check |
|---|---|---|
| Operating system | macOS 11 or later | Open About This Mac from the Apple menu to check the version |
| Chip architecture | Apple Silicon ARM64 or Intel x64 | If Chip shows an Apple M-series processor, choose Apple Silicon |
| System permissions | Network extension and proxy configuration permissions | Follow the system prompts to approve the required permissions on first launch |
Most phones and tablets released in recent years use ARM64. Only older 32-bit devices need the ARM package; if you cannot identify the architecture, choose the universal build provided by the client. Import a subscription after installation and approve the VPN connection request from Android.
For common 64-bit Android phones and tablets. The client brings subscription import, proxy group selection, and the connection toggle together in a mobile interface, then uses Android’s VPN interface to handle selected traffic.
An Android client for the Mihomo ecosystem, offering ARM64, 32-bit ARM, and universal packages. Choosing the matching architecture reduces the download size; when uncertain, the universal build is the safer option.
Suitable for users who work across desktop and mobile devices and want a similar configuration flow on each platform. Packages are available for 64-bit ARM, 32-bit ARM, and x86_64; choose according to the device processor architecture.
A rule-based proxy client for Android, suited to users who want lightweight mobile controls and configuration file management. After downloading the universal package, add a configuration from a file or subscription URL, then establish the VPN connection as prompted by Android.
| Item | Recommended condition | Installation Notes |
|---|---|---|
| System version | Android 8 or later | Newer systems generally offer more complete VPN and background activity management |
| Processor | Prefer ARM64 | Choose the universal build when uncertain; try ARM on older devices |
| Background operation | Allow the client to keep the VPN service running | If connections drop frequently, check battery optimization and background restrictions |
Clash Plus is available through the App Store. After installation, open the client and follow the prompts to import a subscription configuration. When establishing the first connection, iOS will request permission to add a VPN configuration; approve it to control connection status and proxy selection from the client.
A proxy tool for iPhone and iPad that manages subscription configurations, proxy groups, and connection status. The installation link goes directly to the App Store; product details and usage instructions are also available at clashplus.io.
| Item | Recommended condition | Usage Notes |
|---|---|---|
| Device | iPhone or iPad | Open the product page in the App Store on your device |
| System permissions | Allow VPN configuration to be added | Confirm the system prompt on the first connection |
| Configuration source | A subscription URL or supported configuration file | After importing, update the configuration, choose a proxy group, and connect |
Debian, Ubuntu, and derivatives typically use DEB; Fedora, RHEL, Rocky Linux, and other RPM-based distributions use RPM. FlClash also provides AppImage for desktop environments where you want fewer system-level installation steps.
A Mihomo graphical client for Linux desktops with DEB and RPM packages. When using the system proxy, TUN, or desktop autostart, also check your desktop environment, permission policy, and network management service.
Provides three Linux desktop package formats: DEB, RPM, and AppImage. DEB and RPM are convenient for system package management; AppImage can run after being marked executable, making it suitable for temporary use or setups that should not write to system directories.
| Item | Recommended condition | Notes |
|---|---|---|
| Desktop environment | Major 64-bit Linux desktop distributions | For servers or routers, use the Mihomo core below instead |
| Processor | AMD64 / x86_64 | No additional native ARM64 installer is provided in the graphical client section |
| Permissions | Permission to install packages and configure the network | TUN mode requires the appropriate system network permissions |
The standalone core is intended for servers, software routers, containers, and users who maintain configuration files themselves. Regular desktop and mobile users should prefer the graphical clients above, which handle subscriptions, core startup, system proxy settings, and runtime status.
| System | Architecture and format | Supported environment | Download |
|---|---|---|---|
| Windows | AMD64 · ZIP | 64-bit Intel / AMD servers and command-line environments | Download AMD64 |
| Windows | ARM64 · ZIP | Windows on ARM devices | Download ARM64 |
| macOS | Intel x64 · GZ | Macs with Intel processors | Download Intel |
| macOS | Apple Silicon · GZ | Macs with Apple M-series chips | Download Apple Silicon |
| Linux | AMD64 · DEB | Debian and Ubuntu servers | Download DEB |
| Linux | AMD64 · GZ | Generic x86_64 Linux environments | Download AMD64 |
| Linux | ARM64 · GZ | 64-bit ARM servers and routers | Download ARM64 |
| Linux | ARMv7 · GZ | 32-bit ARMv7 routers and development boards | Download ARMv7 |
| Linux | MIPS softfloat · GZ | MIPS routers using software floating point | Download MIPS |
Mihomo parses configurations, establishes connections, and executes rules. Graphical clients build on the core with subscription updates, proxy group selection, system proxy controls, TUN settings, and log viewing. For personal computers or phones, a graphical client is usually the better choice.
In addition to the executable, prepare a valid configuration file, working directory, log management, and startup method. When deploying on a router or server, confirm the listen address, port, firewall, and DNS settings first, then enable traffic forwarding step by step to avoid changing too many network parameters at once.
Downloading a client is only the setup phase. On first launch, import a configuration, choose a proxy mode, and confirm that system traffic is reaching the client.
Use the system wizard for desktop installers; on macOS, move the app to Applications; on Android, open it after installation and grant the required VPN permissions. Linux users should choose DEB, RPM, or AppImage for their distribution.
On the client’s subscription, configuration, or Profiles page, paste the complete subscription URL and download or update it. If the provider supplies a local configuration file, import it from a file instead. After import, you should see the configuration name and proxy groups.
For everyday use, start with Rule mode so the configuration decides which connections use the proxy. Global mode sends more connections through the current proxy policy and is useful for short tests; Direct mode pauses proxying while leaving the client running.
Start with the system proxy for browsers and regular desktop apps. Command-line tools, games, and apps that ignore system proxy settings may require TUN mode. After connecting, visit a familiar website and check the logs for DNS, port, or permission errors.
Choose a package by operating system and processor first, then configure subscriptions and connections. These questions cover the most common decisions when downloading for the first time.
For the fastest installation and subscription import, start with Clash Plus for your platform. Windows and macOS users can also choose Clash Verge Rev, FlClash, or Clash Nyanpasu based on interface preferences. For service mode, configuration overrides, and detailed TUN controls, compare Clash Verge Rev; for a similar workflow across operating systems, consider FlClash.
Open About This Mac from the Apple menu. If Chip shows Apple M1, M2, M3, M4, or a later Apple processor, choose Apple Silicon or ARM64. If Processor shows Intel, choose Intel or x64. A native build usually reduces compatibility-layer dependencies and lets the client core run under the correct architecture.
Recent Android phones and tablets usually use 64-bit ARM processors, corresponding to ARM64-v8a. Older 32-bit devices use armeabi-v7a or ARM. Universal builds include multiple architectures, so they are larger but more convenient when the device architecture is unknown. Some emulators and specialized devices may require x86_64.
The client manages configurations and traffic interception, but the installer does not include a working subscription. Import the complete URL from the subscription or configuration page, wait for the update to finish, then choose a proxy group and mode. Desktop systems also need the system proxy or TUN enabled; mobile devices require approval of the system VPN request.
Usually not. The graphical clients above already include or manage the core required to run, along with subscription updates, proxy switching, and log viewing. Standalone Mihomo files are mainly for servers, software routers, containers, automation scripts, or command-line environments where configurations are maintained manually.